V-belt Movendis P-SPB1757
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPB1757 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPB1757 and any equivalents.
The Movendis P-SPB1757 is a narrow wedge V-belt in the SPB profile, with a 1757 mm length. This page helps you match it to the belt you are replacing. We carry this belt and quote by part number.
To confirm a match, read the marking on the back of the old belt. You are looking for the SPB profile and the 1757 mm length. The P-SPB1757 has a top width of 16.3 mm, a height of 13 mm and a 40-degree angle. If the old belt shows those figures, this is the belt to specify.
If the marking is worn or unreadable, measure the outside length and compare it to 1757 mm. Check the profile against the pulley groove: an SPB belt sits in a 40-degree groove with the top width near 16.3 mm. Send the part number and any photos of the old belt. Our team can help confirm the right belt or suggest an equivalent.
Narrow wedge V-belts like the P-SPB1757 are used in industrial drives where a compact profile is required. When a drive runs more than one belt, replace the full set at the same time so the belts share the load evenly. Inspect the pulleys for wear or debris before installing.
Dimensions
- Section
- SPB
- Length
- 1757mm
Frequently asked questions
- How do I know the P-SPB1757 is the right belt?
- Check the marking on the back of the belt you are replacing. It should show the SPB profile and 1757 mm length. The P-SPB1757 has a top width of 16.3 mm, a height of 13 mm and a 40-degree angle. If those match the old belt and the pulley groove, it is the correct size.
- What should I send to request a quote?
- Send the part number P-SPB1757, the quantity you need, and any photos of the old belt or the drive nameplate. If you are unsure of the profile or length, include the marking from the back of the old belt so we can help confirm the match.
- Should I replace all belts on the drive at once?
- Yes. On a multi-belt drive, replace the full set at the same time. Mixing a new belt with worn belts can cause uneven load sharing and premature wear. Inspect the pulleys for wear or debris before installing the new set.