V-belt Movendis P-SPB1450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPB1450 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPB1450 and any equivalents.
The Movendis P-SPB1450 is a narrow wedge V-belt in the SPB profile, 1450 mm long. Its 16.3 mm top width, 13 mm height and 40 degree angle identify it as a standard SPB section belt. This page gives you the figures to check against your drive before you request a quote.
Profile and length are the two numbers that decide whether a belt fits. SPB sets the cross-section, so the belt seats correctly in an SPB pulley groove, while 1450 mm is the datum length around the belt. The top width of 16.3 mm and height of 13 mm confirm the section; the 40 degree angle describes the flank that grips the groove. Measure your old belt or read the marking on its back, then compare all of these values.
Narrow wedge belts like this one run in drives where a compact section carries the load through the pulley groove. When you replace a belt, check the pulleys for wear, alignment and debris, and inspect the belt for cracking, glazing or missing cords. If a drive uses more than one belt, replace the full set so the belts share the load evenly.
We carry the Movendis P-SPB1450 and supply maintenance, engineering and purchasing teams across the United States, Canada, Mexico and South America. To request a quote, send the part number P-SPB1450 by WhatsApp or email. If you are unsure of the section or length, include the belt marking and your pulley details and our team will confirm the right belt.
Dimensions
- Section
- SPB
- Length
- 1450mm
Frequently asked questions
- What do the SPB profile and 1450 mm length mean?
- SPB is the narrow wedge cross-section, and 1450 mm is the length of the belt. The top width is 16.3 mm, the height is 13 mm and the angle is 40 degrees. Match these figures to your drive.
- How do I confirm this belt fits my drive?
- Read the marking on the back of the old belt and measure its length, or measure the pulley grooves and the drive center distance. Compare the profile and the 1450 mm length against the P-SPB1450.
- How do I request a quote for the P-SPB1450?
- Send the part number P-SPB1450 by WhatsApp or email. If you can, include the old belt marking and your pulley details so the team can confirm the correct belt.