V-belt Movendis P-SPA3000
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPA3000 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPA3000 and any equivalents.
The Movendis P-SPA3000 is a narrow wedge V-belt in the SPA profile with a length of 3000 mm. It is built for drives that use a 12.7 mm top width, 10 mm height and 40-degree angle. Matching it to the belt being replaced starts with the marking on the old belt.
Read the profile and length from the back of the belt you are removing. The replacement must carry the same SPA profile and the same 3000 mm length, with a 12.7 mm top width, 10 mm height and 40-degree angle. If the old marking is worn or unreadable, measure the outside length and confirm the profile before ordering.
A narrow wedge V-belt wears as part of a drive, not on its own. Check the sheave grooves for wear, alignment and any debris, and inspect the other belts on the same drive. Where a drive runs more than one belt, replace the set together so the belts share the load evenly.
To request a quote, send the part number P-SPA3000 by WhatsApp or email. If you are unsure whether this SPA profile and 3000 mm length is the right match, include the old belt marking and the drive details, and the team can help confirm the belt or suggest an equivalent.
Dimensions
- Section
- SPA
- Length
- 3000mm
Frequently asked questions
- How do I confirm the P-SPA3000 is the right belt for my drive?
- Compare the marking on the belt being replaced with the P-SPA3000: SPA profile and 3000 mm length. The belt has a 12.7 mm top width, 10 mm height and 40-degree angle. If the marking is unreadable, send the drive details for help confirming the match.
- Should I replace all belts on the drive at once?
- Yes. On a multi-belt drive, replace the set together so the belts share the load evenly. Check sheave grooves, alignment and the other belts while the drive is open.
- What should I send to request a quote?
- Send the part number P-SPA3000 by WhatsApp or email. If you are unsure about the profile or length, include the old belt marking and the drive details so the team can help confirm the belt or suggest an equivalent.