V-belt Movendis P-SPA2382
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPA2382 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPA2382 and any equivalents.
The Movendis P-SPA2382 is a narrow wedge V-belt in the SPA profile. It measures 2382 mm in length, with a 12.7 mm top width, 10 mm height and a 40 degree angle. We carry it for maintenance and purchasing teams who need to match a belt already on the drive.
The most reliable way to match this belt is to read the marking on the back of the belt being replaced. Look for the SPA profile and the 2382 mm length, then confirm the top width and height against the dimensions above. A belt that has run for a long time can wear and stretch, so a tape measure on the old belt may read short of 2382 mm even when the original was correct.
If the marking is worn off or unreadable, check the drive itself: pulley groove profile, the number of ribs or grooves, and the center distance. Send those details along with the part number P-SPA2382, or send a photo of the old belt and the drive nameplate. We can confirm the SPA profile and 2382 mm length or suggest an equivalent.
On multiple-belt drives, replace all belts in the set at the same time. Mixing a new belt with used belts of the same size can load the new belt unevenly because the used belts have already stretched. Inspect pulley grooves for wear, check alignment, and set tension to the drive manufacturer's specification after installation.
Dimensions
- Section
- SPA
- Length
- 2382mm
Frequently asked questions
- How do I confirm the P-SPA2382 is the right belt for my drive?
- Read the marking on the back of the belt you are replacing. It should show the SPA profile and a 2382 mm length. If it does, and the top width and height match 12.7 mm and 10 mm, the P-SPA2382 is the correct size. If the marking is gone, measure the pulley groove and center distance, or send us a photo.
- What are the dimensions of the Movendis P-SPA2382?
- It is an SPA profile narrow wedge V-belt, 2382 mm long, with a 12.7 mm top width, 10 mm height and a 40 degree angle.
- Can I replace just one belt on a multi-belt drive?
- It is better to replace the full set. Used belts have stretched, so a single new belt alongside them may not share the load evenly. Replace all belts in the set with the same size and profile.