V-belt Movendis P-SPA2240
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPA2240 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPA2240 and any equivalents.
The Movendis P-SPA2240 is a narrow wedge V-belt in the SPA profile, 2240 mm long, with a 12.7 mm top width, 10 mm height and 40-degree angle. Before you fit it, inspect the drive and the sheaves so the new belt runs true from the start.
Check the sheave grooves for wear, burrs, corrosion and buildup. A worn groove lets the belt sit too deep, so it slips and wears fast even when the belt itself is correct. Confirm the sheave groove angle and width suit an SPA profile belt, and check that the shafts and sheaves are aligned and free of runout.
Look over the whole drive while the belt is off: sheave condition, alignment, guarding and tensioning hardware. Replace belts as a set on multi-belt drives, and keep the set matched by part number. Recheck tension after the first run-in period.
If you are matching an existing belt, read the marking on the back and send the full part number, P-SPA2240, plus the profile and length. If the marking is worn, send photos of the belt and sheaves. We carry Movendis narrow wedge V-belts and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPA
- Length
- 2240mm
Frequently asked questions
- What are the dimensions of the Movendis P-SPA2240?
- It is an SPA profile narrow wedge V-belt, 2240 mm long, with a 12.7 mm top width, 10 mm height and 40-degree angle.
- What should I check before fitting this belt?
- Inspect the sheave grooves for wear, burrs, corrosion and buildup, confirm the groove angle and width suit an SPA profile, and check shaft and sheave alignment and runout.
- How do I request a quote for the P-SPA2240?
- Send the part number P-SPA2240 by WhatsApp or email. If the old belt marking is worn, send photos of the belt and sheaves so we can confirm the right belt or suggest an equivalent.