V-belt Movendis P-SPA2182

MOVENDIS P-SPA2182 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPA2182 and any equivalents.

This Movendis P-SPA2182 is a narrow wedge V-belt in the SPA profile, with a length of 2182 mm, a top width of 12.7 mm, a height of 10 mm and a 40° angle. Narrow wedge belts like this one are used on industrial drives where a compact cross-section carries the load, such as pumps, fans, compressors and other plant equipment. Confirm the profile and length against your drive before ordering.

To confirm fit, read the marking on the back of the old belt. The profile must be SPA and the length must be 2182 mm; the top width of 12.7 mm and height of 10 mm match the SPA cross-section, and the 40° angle is the standard wedge angle for this type. If the old belt is worn or the marking is unreadable, measure the outside length and the top width, and check the pulley groove profile.

When you request a quote, send the part number P-SPA2182 and the belt marking, or the profile and length from the drive. If the drive uses more than one belt, note the number of belts in the set so the replacement can be matched. Our team replies by WhatsApp or email and can help confirm the right belt or suggest an equivalent.

Inspect the drive before installation: check pulley grooves for wear, align the pulleys, and set the correct tension. A belt that runs hot, slips or wears quickly often points to a worn groove or misalignment rather than the belt itself. Replacing belts in sets keeps the load shared evenly across the drive.