V-belt Movendis P-SPA1607
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPA1607 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPA1607 and any equivalents.
The Movendis P-SPA1607 is a narrow wedge V-belt in the SPA profile, with a 1607 mm length, 12.7 mm top width, 10 mm height and a 40-degree angle. Before you fit it, inspect the drive so the new belt runs true from the first start.
Check the sheaves for wear, grooves that have widened or become polished, and any burrs or nicks on the flanks. Confirm the sheave grooves match the SPA profile, that the sheaves are aligned with each other, and that the shafts turn freely. A worn or misaligned sheave will damage a new belt quickly, regardless of the belt's condition.
Inspect the drive for correct tensioning, damaged guards, and any buildup of debris or oil that can affect grip. If the drive uses multiple belts, replace the full set so all belts share the load evenly. Record the belt marking before removal, including the Movendis part number P-SPA1607, so the replacement matches the original specification.
When you request a quote, send the part number P-SPA1607 along with the profile, 1607 mm length, 12.7 mm top width, 10 mm height and 40-degree angle. Our team can confirm the belt or suggest an equivalent based on those details.
Dimensions
- Section
- SPA
- Length
- 1607mm
Frequently asked questions
- What are the dimensions of the Movendis P-SPA1607?
- It is an SPA profile narrow wedge V-belt with a 1607 mm length, 12.7 mm top width, 10 mm height and 40-degree angle.
- Why should I check the sheaves before fitting this belt?
- Worn, misaligned or damaged sheaves can cause a new belt to wear rapidly or run poorly. Inspecting and correcting the drive first helps the belt seat and track correctly.
- What information should I send to request a quote?
- Send the part number P-SPA1607, the SPA profile, and the 1607 mm length, 12.7 mm top width, 10 mm height and 40-degree angle. If you are replacing an existing belt, include the marking from the back of the old belt.