V-belt Movendis P-SPA1550
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPA1550 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPA1550 and any equivalents.
The Movendis P-SPA1550 is a narrow wedge V-belt in the SPA profile, 1550 mm long with a 12.7 mm top width, 10 mm height and 40° angle. Narrow wedge belts like this are used on compact, high-speed industrial drives where a standard V-belt would be too wide. This page covers where the profile fits and how to confirm the belt matches your drive.
Narrow wedge V-belts are common on pumps, fans, compressors, machine tools and similar equipment driven by electric motors. The SPA profile is a metric narrow section, so it suits drives designed around that section rather than a classic lettered V-belt. If your drive was built for an SPA belt, matching the profile and length is the first check.
To confirm fit, read the marking on the back of the old belt and compare it with the P-SPA1550: profile SPA, length 1550 mm. Measure the top width and height if the marking is worn, and check the pulley groove for wear, alignment and correct section. A belt that sits too high or too low in the groove will not transmit load correctly.
When you request a quote, send the part number P-SPA1550, the quantity, and the equipment or drive it goes on. If the old belt is unmarked or the number is unclear, send the profile, length, top width and height so we can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPA
- Length
- 1550mm
Frequently asked questions
- What does the SPA profile mean for fit?
- SPA is the narrow wedge section of this belt. The P-SPA1550 has a 12.7 mm top width, 10 mm height and 40° angle, and it must match the pulley groove section on your drive.
- How do I confirm the length?
- The P-SPA1550 is 1550 mm long. Check the marking on the old belt first; if it is worn, measure the belt and compare with the drive's required length.
- What should I send with my quote request?
- Send the part number P-SPA1550, the quantity you need, and the equipment or drive it is used on. If you are unsure of the number, send the profile, length, top width and height from the old belt.