V-belt Movendis P-SPA1272
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPA1272 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPA1272 and any equivalents.
The Movendis P-SPA1272 is a narrow wedge V-belt in the SPA profile, 1272 mm long, with a 12.7 mm top width, 10 mm height and 40° angle. Narrow wedge belts are used on compact, high-speed industrial drives where standard V-belts would be too bulky. This page gives you the data needed to confirm fit and request a quote.
Narrow wedge V-belts such as this SPA-profile belt are common on pumps, fans, compressors, machine tools and other drives that run at higher speeds with smaller pulleys. The 1272 mm length and 12.7 mm top width identify the belt; the 40° angle and 10 mm height describe the cross-section. Confirm that your drive uses an SPA-profile pulley and that the old belt's length matches before ordering.
To verify fit, read the marking on the back of the old belt. Look for the SPA profile and the 1272 mm length. If the marking is worn, measure the outside length and the top width, and note the pulley groove profile. Send the part number P-SPA1272, the old belt marking or your measurements, and the drive details to our team by WhatsApp or email. We carry the Movendis line and can help confirm the correct belt or suggest an equivalent.
Dimensions
- Section
- SPA
- Length
- 1272mm
Frequently asked questions
- What does the SPA profile mean for this belt?
- SPA is a narrow wedge profile. This belt has a 12.7 mm top width, 10 mm height and 40° angle. It is designed for drives with SPA-profile pulleys.
- How do I confirm that the P-SPA1272 will fit my drive?
- Check the old belt for an SPA marking and a 1272 mm length. If the marking is unreadable, measure the outside length and top width and inspect the pulley groove profile. Send those details with your quote request.
- What information should I send for a quote?
- Send the part number P-SPA1272, the old belt marking if legible, and the drive or equipment details. If you have measurements, include the outside length and top width. Our team replies promptly by WhatsApp or email.