V-belt Movendis P-SPA1032
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPA
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPA1032 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPA1032 and any equivalents.
The Movendis P-SPA1032 is a narrow wedge V-belt in the SPA profile, with a 1032 mm length, 12.7 mm top width, 10 mm height, and 40° angle. Narrow wedge belts are used in industrial drives where a compact cross-section carries the load, such as pumps, fans, compressors, and other machinery. Confirm fit by matching the profile and length to the drive.
To confirm this belt fits, check the existing belt marking for the SPA profile and the 1032 mm length. The 12.7 mm top width, 10 mm height, and 40° angle are fixed dimensions of the P-SPA1032, so they must match the pulley groove. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to 1032 mm, and verify the pulley groove width and angle.
Narrow wedge V-belts like the SPA profile are common on drives that need a higher power density than a classic V-belt. The P-SPA1032 suits equipment where the drive is designed for an SPA cross-section. When replacing, inspect the pulleys for wear, alignment, and debris, and check the belt for cracking, glazing, or missing cords. Replace belts in sets when the drive uses multiple belts to keep tension even.
Dimensions
- Section
- SPA
- Length
- 1032mm
Frequently asked questions
- What size is the Movendis P-SPA1032?
- It is an SPA profile narrow wedge V-belt with a 1032 mm length, 12.7 mm top width, 10 mm height, and 40° angle.
- How do I confirm the P-SPA1032 will fit my drive?
- Match the SPA profile and 1032 mm length to the belt marking or the drive specification. Also check that the pulley groove accepts a 12.7 mm top width and 40° angle.
- What should I send to request a quote for this belt?
- Send the part number P-SPA1032, the quantity, and any details from the old belt or drive nameplate. If you have the old belt, note the profile and length from its back.