V-belt Movendis P-D314
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- D
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-D314 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-D314 and any equivalents.
The Movendis P-D314 is a classical wrapped V-belt with a D profile and a length of 7975 mm. This page covers how to match it to the belt you are replacing. We carry Movendis belts and quote by part number.
Start with the marking on the belt you are replacing. Confirm the profile is D and the length reads 7975 mm, then compare that against the P-D314. A wrapped classical V-belt like this one is identified by its profile and its length, so those two values are what you match first.
If the old belt is worn, damaged or the marking is unreadable, measure across the top of the belt for the profile and around the belt for the length. Send both values with the part number P-D314, or send a photo of the marking, and we will help confirm the right belt or suggest an equivalent.
When more than one belt runs on the same drive, replace them as a set so the load stays even across the sheaves. Inspect the sheaves for wear or debris at the same time, and check that the belt sits correctly in the groove before you restart the drive.
Dimensions
- Section
- D
- Length
- 7975mm
Frequently asked questions
- What do I need to send to get a quote for the P-D314?
- Send the part number P-D314, the quantity, and the profile and length from the belt you are replacing. A photo of the marking on the back of the belt also helps us confirm the match.
- How do I confirm this is the belt I need?
- Match the profile and the length. The P-D314 is a D profile belt with a length of 7975 mm. If your old belt shows the same profile and length, this is the one to quote.
- Should I replace more than one belt at a time?
- On drives that use multiple belts, replace them as a set so they share the load evenly. Inspect the sheaves for wear at the same time.