V-belt Movendis P-D245
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- D
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-D245 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-D245 and any equivalents.
The Movendis P-D245 is a classical wrapped V-belt with a D profile and a length of 6225 mm. Before you fit a replacement, take a few minutes to inspect the drive and sheaves. A worn sheave or misaligned drive will shorten the life of any new belt, no matter the brand.
Check sheave grooves for wear, rust, or embedded debris. Look for a step or ridge where the belt rides; if the groove is worn, the new belt will sit too deep and slip. Confirm sheaves are aligned with a straightedge or laser tool, and verify that the drive is locked out and the belt tension is released before removal.
Inspect the old belt as you take it off. Note the profile and length on the back of the belt, and compare to the P-D245: D profile, 6225 mm. Also check the sheave diameters and the condition of the bushings and keys. If you find a damaged sheave, replace or repair it before installing the new belt.
When you are ready to order, send the part number P-D245 and the quantity you need. If you have the old belt, a photo of the marking on the back helps us confirm the correct replacement. We carry the Movendis P-D245 and can help you match it to your drive.
Dimensions
- Section
- D
- Length
- 6225mm
Frequently asked questions
- What should I check on the drive before fitting the P-D245?
- Inspect sheave grooves for wear or debris, verify alignment, and confirm the drive is locked out. Worn sheaves can cause the new belt to slip or wear quickly.
- How do I identify the correct replacement belt?
- Look for the profile and length on the back of the old belt. The P-D245 is a D profile belt with a length of 6225 mm. If the marking is worn, send us a photo and we can help confirm.
- What information do I need to request a quote?
- Send the part number P-D245 and the quantity you need. If you have the old belt, include a photo of the marking on the back to help us confirm the correct replacement.