V-belt Movendis P-D194

MOVENDIS P-D194 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-D194 and any equivalents.

The Movendis P-D194 is a classical wrapped V-belt with a D profile and a length of 4925 mm. It is used on heavy-duty industrial drives where a wrapped classical belt is specified. Confirm the profile and length against your drive before ordering.

Classical wrapped V-belts like this one are common on older or slower drives such as fans, pumps, compressors and process equipment. The D profile is a large cross-section, so it suits drives that need a robust belt rather than a compact narrow wedge belt. The P-D194 is built for those applications where the original drive was designed around a classical D section.

To confirm fit, check the belt you are replacing. The profile should be D and the length marked on the back should read 4925 mm. If the old belt is worn or the marking is gone, measure the outside length and compare it to 4925 mm, and check the pulley groove width to confirm it takes a D section. A belt that is too short will not tension correctly; one that is too long may not allow proper adjustment.

When you request a quote, send the part number P-D194 and the quantity you need. If you are replacing a set, note how many belts run on the drive so we can quote the full set. If you are unsure whether this is the correct belt, send a photo of the marking on the back of the old belt and the drive nameplate, and we can help confirm the right belt or suggest an equivalent.