V-belt Movendis P-D167
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- D
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-D167 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-D167 and any equivalents.
The Movendis P-D167 is a classical wrapped V-belt with a D profile and a length of 4250 mm. Before you install it, inspect the drive and sheaves so the new belt runs true and wears evenly.
Check sheave grooves for wear, rust, or embedded debris. A worn groove lets the belt sit too deep, which leads to slip and heat. Confirm that the sheaves are aligned and that the shafts turn freely by hand. Look for oil or grease on the drive, because wrapped belts can be affected by contamination.
Measure the old belt and compare it with the P-D167. The D profile and 4250 mm length are the key figures. If you are replacing more than one belt on a multi-belt drive, fit the full set at the same time so the load is shared. After installation, check tension again once the drive has run under load.
MR Industrial Accessories supplies this Movendis belt to maintenance, engineering, and purchasing teams across the United States, Canada, Mexico, and South America. To request a quote, send the part number P-D167 by WhatsApp or email. If you need help confirming the right belt for your drive, include the profile and length from the old belt marking.
Dimensions
- Section
- D
- Length
- 4250mm
Frequently asked questions
- What should I check on the drive before fitting the P-D167?
- Inspect the sheave grooves for wear or damage, verify alignment, and make sure the drive turns freely. Clean away any oil or debris that could affect the belt.
- How do I confirm the P-D167 is the correct belt?
- Compare the profile and length on the old belt with the P-D167. This belt has a D profile and a length of 4250 mm.
- What information should I send with my quote request?
- Send the part number P-D167 and, if you are replacing a belt, the profile and length from the old belt marking. Our team can help confirm the right belt for your drive.