V-belt Movendis P-D154
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- D
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-D154 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-D154 and any equivalents.
The Movendis P-D154 is a classical wrapped V-belt with a D profile and a length of 3915 mm. The D profile is the largest cross-section in the classical series, used where a single belt must carry heavy loads. This page gives you the profile and length so you can confirm it against your drive.
When you read a belt marking, the profile and length are the two numbers that decide fit. The P-D154 is a D profile belt, and the length is 3915 mm. Check both against the old belt or the drive documentation before you request a quote.
Classical wrapped V-belts are built for general industrial drives. The D profile is a heavy-duty cross-section, so it is common on large pumps, fans, compressors and similar equipment. If your drive uses multiple belts, replace the full set at the same time to keep tension even across the grooves.
To get a quote, send the part number P-D154 by WhatsApp or email. If you are unsure whether this is the right belt, include the profile and length from your old belt, or a photo of the marking on the back. We will confirm the match or suggest an equivalent.
Dimensions
- Section
- D
- Length
- 3915mm
Frequently asked questions
- What do the profile and length tell me about the P-D154?
- The profile is D, which is the largest classical V-belt cross-section. The length is 3915 mm. Both must match your drive for the belt to seat and run correctly.
- Can I use this belt on a drive that currently runs a different profile?
- No. The profile must match the pulley groove. If your drive uses a different profile, the belt will not seat properly. Send us the marking from your old belt and we can help identify the correct replacement.
- How do I request a quote for the P-D154?
- Send the part number P-D154 by WhatsApp or email. If you have the old belt, include the profile and length from its marking so we can confirm it before quoting.