V-belt Movendis P-D136
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- D
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-D136 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-D136 and any equivalents.
The Movendis P-D136 is a classical wrapped V-belt with a D profile and a length of 3454 mm. When you are replacing a belt, the most reliable starting point is the marking on the back of the old belt. Confirm the profile and the length, then request a quote by part number.
The marking on the back of the belt usually shows the profile and the length. Read it before you remove the belt, or note it as soon as the belt is off. The P-D136 corresponds to a D profile and a length of 3454 mm. If the marking is worn or unreadable, measure the belt and compare the profile and length to the data here.
A D profile classical V-belt is used in drives that take a classical cross-section. Check that the new belt matches the old one in profile and length, and inspect the sheaves for wear or damage while the belt is off. If the drive uses more than one belt, replace the full set so the belts share the load evenly.
We carry the Movendis P-D136 for maintenance, engineering and purchasing teams in the United States, Canada, Mexico and South America. Send the part number by WhatsApp or email and the team will reply promptly. If you need help confirming the right belt, include the marking from the old belt and the drive details.
Dimensions
- Section
- D
- Length
- 3454mm
Frequently asked questions
- How do I confirm the P-D136 is the belt I need?
- Check the marking on the back of the belt being replaced. It should show a D profile and a length of 3454 mm. If the marking is not clear, measure the old belt and compare it to those values.
- What should I send with my quote request?
- Send the part number P-D136, and if you are replacing an existing belt, include the marking from the back of that belt. A photo of the marking can help the team confirm the match.
- Should I replace all belts on the drive at the same time?
- If the drive uses multiple belts, replacing them as a set helps keep the load shared evenly. Inspect the sheaves for wear while the belts are off.