V-belt Movendis P-CC90
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CC
- Series
- Double Sided V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-CC90 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-CC90 and any equivalents.
The Movendis P-CC90 is a double-V (hexagonal) belt with a CC profile and a length of 2286 mm. If you are replacing a belt on a drive that uses double-V belts, start by matching the profile and length to the belt you are removing.
A double-V belt drives from both sides, so the profile and length on the old belt are the first things to check. Look for the marking on the back of the belt; if it reads CC and 2286 mm, the Movendis P-CC90 is the same size. Confirm the belt is not twisted and that the marking is legible before ordering.
When the old belt is worn or the marking is gone, measure the length and check the cross-section against the CC profile. The P-CC90 is a single belt, but on many drives double-V belts are replaced in matched sets. Inspect the sheaves for wear while the belt is off.
Send the part number P-CC90, or the profile and length from the old belt, by WhatsApp or email. The team can confirm the right belt or suggest an equivalent and reply with a quote.
Dimensions
- Section
- CC
- Length
- 2286mm
Frequently asked questions
- How do I confirm the Movendis P-CC90 is the right belt?
- Check the marking on the back of the belt you are replacing. If it shows a CC profile and a 2286 mm length, the P-CC90 matches. If the marking is unreadable, measure the length and compare the cross-section to the CC profile.
- Can I replace just one belt on a double-V drive?
- On many drives, double-V belts are replaced in matched sets to keep load sharing even. Inspect the other belts on the drive and replace them as a set if they show wear.
- What information should I send for a quote?
- Send the part number P-CC90, or the profile and length from the belt you are replacing. Photos of the belt marking and the drive help the team confirm the right belt or suggest an equivalent.