V-belt Movendis P-CC210

MOVENDIS P-CC210 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-CC210 and any equivalents.

The Movendis P-CC210 is a double-V (hexagonal) belt in the CC profile with a length of 5334 mm. Both sides of a double-V belt are designed to grip, so it drives from either face in reversing or multi-pulley layouts. The profile and the length are the two numbers to match when you replace one.

Start with the profile. CC is the cross-section that must sit correctly in the pulley groove; a different profile will not seat or transmit load the same way. Then confirm the length: 5334 mm. If the old belt is worn or stretched, measure it against the pulley centers and compare with the marking on the back of the belt.

Double-V belts are often used in drives where the belt twists through an idler or runs on both sides. Inspect the pulleys for wear and alignment before fitting a new belt, and check that both faces of the belt are clean and free of oil. Replace belts in a set when the drive uses more than one so the load stays even.

We carry the Movendis P-CC210 for maintenance and replacement work. To request a quote, send the part number P-CC210, the profile CC and the length 5334 mm by WhatsApp or email. If you are unsure of the number, send a photo of the marking on the back of the old belt and we will help confirm it.