V-belt Movendis P-CC173
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CC
- Series
- Double Sided V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-CC173 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-CC173 and any equivalents.
The Movendis P-CC173 is a double-V (hexagonal) belt in the CC profile with a length of 4394 mm. It is built to run on both sides, so it suits drives that use the same belt to turn pulleys in opposite directions. This page covers what to check when matching it to the belt you are replacing.
Start by reading the marking on the back of the old belt. Confirm it is a double-V (hexagonal) belt and that the profile reads CC. Then check the length: the P-CC173 measures 4394 mm. If the old belt is worn or the marking is gone, measure the length along the belt and compare it with this figure before you order.
A double-V belt contacts both the top and bottom pulleys, so wear shows on both faces. Inspect the pulleys for grooves, alignment and any debris that could damage a new belt. If the drive uses more than one belt, replace the full set at the same time so the load stays even across the grooves.
Send the part number P-CC173 by WhatsApp or email to request a quote. If you are not certain the CC profile and 4394 mm length match your drive, include the belt marking, the pulley dimensions and a photo of the drive. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- CC
- Length
- 4394mm
Frequently asked questions
- How do I confirm the P-CC173 is the right belt?
- Check the old belt marking for a double-V (hexagonal) belt in the CC profile, then compare its length with 4394 mm. If the marking is unreadable, measure the belt and send the details for confirmation.
- Can I replace just one belt on a multi-belt drive?
- On drives that use a set of belts, replace all belts at the same time. Mixing a new belt with worn ones can cause uneven load and faster wear.
- What should I send to request a quote?
- Send the part number P-CC173 by WhatsApp or email. If you want the fit checked first, include the belt marking, pulley dimensions and a photo of the drive.