V-belt Movendis P-CC128
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CC
- Series
- Double Sided V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-CC128 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-CC128 and any equivalents.
The Movendis P-CC128 is a double-V (hexagonal) belt in the CC profile with a length of 3251 mm. Both the profile and the length are the two figures to check first when you are replacing a hex belt or specifying one for a new drive.
A double-V belt carries V-shaped cross sections on both faces, so it can drive from either side and is used where a drive runs on both sides of the belt. The profile sets the cross section that has to sit correctly in the pulley grooves, and the length sets the fit around the drive. For this belt those are CC and 3251 mm.
The most reliable way to match a belt already in service is to read the marking on the back of the old belt and compare it with the profile and length here. If the marking is worn or unreadable, measure the old belt and note the drive it runs on. Send the part number, the profile and the length to our team and we will confirm the belt or suggest an equivalent.
Because a double-V belt drives from both faces, both sets of grooves should be checked at the same time. Look for wear, glazing, contamination or misalignment on each side before a new belt goes on, and replace belts in a matched set rather than one at a time where the drive uses more than one.
Dimensions
- Section
- CC
- Length
- 3251mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The profile, CC, identifies the cross section that must seat in the pulley grooves. The length, 3251 mm, is the belt length. Both need to match the drive before you order.
- How do I confirm the P-CC128 is the right belt?
- Read the marking on the back of the belt in service and compare it with the profile and length listed here. If the marking cannot be read, measure the old belt and send us the details.
- What should I send to request a quote?
- Send the part number P-CC128, along with the profile and length, by WhatsApp or email. Our team will confirm the belt or suggest an equivalent.