V-belt Movendis P-C84.5
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C84.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C84.5 and any equivalents.
This Movendis P-C84.5 is a classical wrapped V-belt in a C profile, with a length of 2150 mm, a top width of 22 mm and a height of 14 mm. It is built for conventional V-belt drives on industrial machinery, where a wrapped classical belt is the specified replacement. Use the profile and length to confirm it matches the drive before ordering.
Classical wrapped V-belts like this one are used on drives that do not call for a narrow wedge belt, cogged belt or synchronous belt. The C profile is the section to match first, then the 2150 mm length and the 40° angle. If the drive was originally fitted with a C-section classical belt, the P-C84.5 is the correct type to compare against.
To confirm fit, read the marking on the back of the old belt and measure its outside length. Compare the profile letter and the length in millimeters with the P-C84.5 figures above. Check the pulley grooves for wear, and replace belts in sets when a drive uses more than one so the load stays even across the set.
Send the part number P-C84.5, or the marking from the old belt, by WhatsApp or email to request a quote. If the number on the belt does not match, send the profile, the length and the drive details, and the team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 2150mm
Frequently asked questions
- What does the C profile mean on this Movendis belt?
- C is the classical V-belt section. This belt has a 22 mm top width, a 14 mm height and a 40° angle, and a length of 2150 mm. Match those figures to the drive before replacing.
- How do I confirm the P-C84.5 fits my drive?
- Read the marking on the back of the old belt and measure its length. The replacement should carry the same C profile and a 2150 mm length. Inspect the pulley grooves at the same time.
- What should I send to get a quote?
- Send the part number P-C84.5, or the full marking from the old belt, by WhatsApp or email. Include the profile, the length in millimeters and the drive details if the number is not clear.