V-belt Movendis P-C67
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C67 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C67 and any equivalents.
The Movendis P-C67 is a classical wrapped V-belt in the C profile, with a 1702 mm length, 22 mm top width, 14 mm height and 40° angle. Classical wrapped V-belts are used on standard industrial drives where a single belt runs in a matching sheave groove. Confirm fit by checking the old belt's profile and length against these dimensions.
When matching the P-C67 to a drive, start with the profile. The C section is a classical V-belt profile, and this belt measures 22 mm across the top, 14 mm high and 1702 mm in length. A belt that is too short will not seat properly; one that is too long will not tension correctly. Compare the marking on the back of the existing belt with the P-C67 code and confirm the profile and length before ordering.
The 40° angle is the included angle of the belt's cross-section, which seats in the sheave groove. Inspect the sheaves for wear, rust or debris, and check that the belt rides at the correct height in the groove. If a drive uses multiple belts, replace them as a set so the load is shared evenly.
To request a quote, send the part number P-C67, the quantity, and the profile and length from the old belt. If you are unsure of the profile, a photo of the belt marking and a measurement of the top width and length help confirm the correct item.
Dimensions
- Section
- C
- Length
- 1702mm
Frequently asked questions
- How do I confirm the Movendis P-C67 fits my drive?
- Check the old belt's profile and length. The P-C67 is a C profile classical V-belt, 1702 mm long, 22 mm top width, 14 mm height, with a 40° angle. If the old belt matches these dimensions and the sheave groove is a C section, it is the correct fit.
- What should I send to get a quote for the P-C67?
- Send the part number P-C67, the quantity you need, and any details from the old belt such as the profile and length. If you have the old belt, the marking on the back and a measurement of the top width and length help confirm the match.
- Should I replace multiple belts on the same drive at once?
- Yes. On drives that use more than one belt, replace all belts as a set. Belts that have run for different lengths of time can have different tension and wear, which affects how the load is shared.