V-belt Movendis P-C64
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C64 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C64 and any equivalents.
The Movendis P-C64 is a classical V-belt in the C profile, with a 1626 mm length. It measures 22 mm across the top, 14 mm in height and has a 40° angle. This page is for maintenance and purchasing teams matching it to the belt being replaced.
Start with the marking on the old belt. If it reads P-C64, this is the same belt. If the old belt is unreadable, measure the outside length and compare it to the 1626 mm figure, and check the cross-section against the 22 mm top width and 14 mm height. The C profile and 40° angle confirm the family.
A classical V-belt can look correct at a glance and still be the wrong size. Confirm the profile letter and the length before ordering, and inspect the drive while the belt is off: sheave wear, alignment and any oil or heat exposure. If the drive runs more than one belt, replace the full set so the load stays even.
Send the part number P-C64 by WhatsApp or email and the team will confirm the belt or suggest an equivalent. If you are unsure of the number, send the marking from the back of the belt, the profile, the length and the top width and height.
Dimensions
- Section
- C
- Length
- 1626mm
Frequently asked questions
- How do I confirm the P-C64 is the right belt?
- Check the marking on the old belt for P-C64. If it is worn off, measure the length and compare it to 1626 mm, and check the top width of 22 mm and height of 14 mm against the C profile.
- What should I send for a quote?
- Send the part number P-C64 by WhatsApp or email. If you do not have the number, send the marking from the back of the belt, the profile, the length, and the top width and height.
- Should I replace more than one belt at a time?
- If the drive uses a set of belts, replace the full set together. Mixing a new belt with worn belts can leave the load uneven across the drive.