V-belt Movendis P-C59
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C59 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C59 and any equivalents.
The Movendis P-C59 is a classical wrapped V-belt in the C profile, with a 1500 mm length, 22 mm top width, 14 mm height and a 40° angle. Before fitting a replacement, inspect the drive and sheaves for wear, alignment and damage. We carry this belt and quote by part number.
A new belt on a worn drive will not run correctly. Check the sheave grooves for scoring, corrosion or a step worn into the flanks. Look for a shiny groove bottom, which shows the belt has been bottoming out. Verify that the sheaves are aligned and that the shafts turn freely. Replace worn or damaged sheaves before fitting the P-C59.
The P-C59 is a wrapped classical V-belt: C profile, 1500 mm long, 22 mm top width, 14 mm high, 40° angle. Confirm the old belt's marking matches this profile and length. If the drive uses more than one belt, fit a full matched set so the load is shared evenly. Do not mix a new belt with old belts on the same drive.
Send the part number P-C59 by WhatsApp or email and our team will confirm the belt for your drive. If you are unsure of the profile or length, send a photo of the marking on the back of the old belt and the sheave dimensions. We reply promptly and can suggest an equivalent when needed.
Dimensions
- Section
- C
- Length
- 1500mm
Frequently asked questions
- What are the dimensions of the Movendis P-C59?
- It is a C profile classical wrapped V-belt with a 1500 mm length, 22 mm top width, 14 mm height and a 40° angle.
- What should I check before installing this belt?
- Inspect the sheave grooves for wear, scoring or a step, check alignment, and confirm the shafts turn freely. Replace any worn or damaged sheaves before fitting the new belt.
- How do I request a quote for the P-C59?
- Send the part number P-C59 by WhatsApp or email. If you need help confirming the belt, include a photo of the marking on the old belt and the sheave dimensions.