V-belt Movendis P-C50
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C50 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C50 and any equivalents.
The Movendis P-C50 is a classical wrapped V-belt in profile C with a 1270 mm length. The profile and length are the two numbers that decide whether this belt fits your drive. We carry this belt and quote it by part number.
Profile C sets the cross-section: 22 mm top width, 14 mm height and a 40 degree angle. That is the shape that must sit correctly in the pulley groove. The 1270 mm length is the datum that must match the drive's required belt length, so always confirm both against the belt you are replacing.
This is a classical wrapped V-belt, not a narrow wedge belt, cogged belt or synchronous belt. It belongs to the Movendis Classical Wrapped V-Belts series. When you send a quote request, include the part number P-C50 and, if possible, the marking on the back of the old belt.
If you are replacing more than one belt on the same drive, order the full set at the same time so the belts run together as a matched group. Inspect the pulleys for wear or debris while the drive is open, since a worn groove can shorten the life of a new belt.
Dimensions
- Section
- C
- Length
- 1270mm
Frequently asked questions
- What does the profile and length tell me about the P-C50?
- Profile C defines the cross-section of the belt: 22 mm top width, 14 mm height and a 40 degree angle. The 1270 mm length is the belt's length. Both values must match the drive and the belt being replaced.
- How do I request a quote for the Movendis P-C50?
- Send the part number P-C50 by WhatsApp or email. If you can, include the marking on the back of the old belt and the drive details so we can confirm it is the right belt.
- Can I replace just one belt on a multi-belt drive?
- For drives that use more than one belt, replacing the full set at the same time is recommended so the belts share the load evenly. Order the quantity you need for the complete set.