V-belt Movendis P-C424
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C424 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C424 and any equivalents.
The Movendis P-C424 is a classical wrapped V-belt in the C profile. It measures 10770 mm in length, with a 22 mm top width, 14 mm height, and a 40-degree angle. This belt is used on heavy-duty industrial drives where a classical cross-section is specified.
To confirm fit, check the drive's sheave groove profile and the required belt length against the P-C424's C profile and 10770 mm length. The 22 mm top width and 14 mm height define the cross-section that must sit correctly in the sheave. The 40-degree angle is the standard included angle for this classical V-belt type.
Classical wrapped V-belts like the P-C424 are found on drives such as fans, pumps, compressors, and other process equipment that use C-section sheaves. When replacing, inspect the sheaves for wear and alignment, and verify that the belt length matches the drive's requirement. If the old belt's marking is legible, note the profile and length to cross-check against this belt.
For a quote, send the part number P-C424 and the quantity needed. If you are unsure whether this is the correct belt for your drive, include the old belt's marking or the drive's sheave dimensions. We carry the Movendis line and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 10770mm
Frequently asked questions
- What is the profile and length of the Movendis P-C424?
- It is a C profile classical V-belt with a length of 10770 mm, a top width of 22 mm, a height of 14 mm, and a 40-degree angle.
- How do I confirm this belt fits my drive?
- Check that your sheaves accept a C profile belt and that the required belt length is 10770 mm. Also verify the top width and height match the sheave groove dimensions.
- What information should I send for a quote?
- Send the part number P-C424 and the quantity. If you are unsure about fit, include the old belt's marking or the drive's sheave dimensions so we can help confirm the correct belt.