V-belt Movendis P-C394
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C394 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C394 and any equivalents.
The Movendis P-C394 is a classical wrapped V-belt with a C profile and a length of 10008 mm. Before fitting a new belt, inspect the drive and sheaves so the replacement runs true and lasts.
Check each sheave groove for wear, rust, or embedded debris. A worn groove lets the belt sit too deep, so it slips and overheats. Measure the groove width and compare it to the 22 mm top width and 14 mm height of this belt. Confirm the sheaves are aligned and the shafts turn freely.
Look at the old belt as you remove it. Cracking, glazing, or missing cover indicates the drive needs attention beyond a new belt. If the drive uses multiple belts, replace them as a set so the load stays even. The P-C394 has a 40-degree angle and a C profile, matching the sheave groove it was designed to run in.
When you request a quote, send the part number P-C394 and the quantity you need. If you are unsure whether this is the right belt for your drive, share the belt marking and the sheave dimensions, and we will help confirm the C profile and 10008 mm length.
Dimensions
- Section
- C
- Length
- 10008mm
Frequently asked questions
- What should I check on the drive before installing a Movendis P-C394?
- Inspect sheave grooves for wear, rust, or debris, and verify alignment. Confirm the groove matches the belt's 22 mm top width and 40-degree angle. Replace belts in sets when the drive uses more than one.
- How do I identify the P-C394 on an existing belt?
- Look for the part number on the back of the belt. This belt is a classical wrapped V-belt with a C profile and a length of 10008 mm. If the marking is worn, measure the top width and height to compare with 22 mm and 14 mm.
- What information do you need to quote the Movendis P-C394?
- Send the part number P-C394 and the quantity. If you are confirming a replacement, include the old belt marking and your sheave dimensions so we can help verify the profile and length.