V-belt Movendis P-C39.25
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C39.25 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C39.25 and any equivalents.
The Movendis P-C39.25 is a classical wrapped V-belt in a C profile. It measures 997 mm long, with a 22 mm top width, 14 mm height and a 40-degree angle. When you need to match an existing drive, start by reading the marking on the back of the old belt.
The marking on the back of a worn belt is the most reliable starting point. It tells you the profile and the length in one line, even when the belt is stretched, dirty or too worn to measure accurately. Write down the full code you find, including any prefix, and note the drive it came from.
The P-C39.25 is a C profile classical V-belt with a 997 mm length. Its 22 mm top width, 14 mm height and 40-degree angle match the standard C section. If the old marking is unreadable, check the pulley groove width and the center distance of the drive, then send those details along with the part number.
Send the belt code, the drive location and any photos of the old belt by WhatsApp or email. The team can confirm the right belt or suggest an equivalent from the Movendis line. For drives with multiple belts, include the number of belts in the set so the replacement can be matched as a group.
Dimensions
- Section
- C
- Length
- 997mm
Frequently asked questions
- How do I read the marking on a classical V-belt?
- The marking is printed on the back of the belt. It typically shows the profile letter and the length in millimeters. Write down the full code exactly as it appears, including any prefix, and note the drive it was removed from.
- What if the marking on my old belt is worn off?
- Measure the top width and the height of the belt, and measure the pulley groove width. Also note the center distance between the pulleys. Send those measurements and the drive details by WhatsApp or email, and the team can help identify the correct belt.
- Can I replace just one belt in a multi-belt drive?
- On a drive that uses several belts, it is common practice to replace the full set at the same time. The belts in a set wear together, and mixing a new belt with worn ones can change how the load is shared. Include the number of belts in the set when you request a quote.