V-belt Movendis P-C37
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C37 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C37 and any equivalents.
The Movendis P-C37 is a classical wrapped V-belt in the C profile, with a 940 mm length, 22 mm top width, 14 mm height and a 40-degree angle. Use the profile and length to confirm this belt fits your drive before you request a quote.
The C profile is the section that must match your pulley groove. The P-C37 measures 22 mm across the top, stands 14 mm high and has a 40-degree angle, so it seats in a standard C-section sheave. If your drive was built around a C profile, this is the section to specify.
Length is the second check. At 940 mm, the P-C37 only works where the drive center distance and pulley diameters call for that length. Read the marking on the old belt and compare it with the profile and length above; if both match, the P-C37 is the belt to quote.
For a quote, send the part number P-C37, the quantity and the drive it runs on. If you are unsure between this belt and another, share the old belt's marking and a photo of the drive. The team can confirm the C profile and 940 mm length or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 940mm
Frequently asked questions
- What do the C profile and 940 mm length mean for my drive?
- The C profile means the belt has a 22 mm top width, 14 mm height and 40-degree angle for a C-section pulley groove. The 940 mm length is the belt's length around the drive. Both must match your existing belt or the drive's requirements.
- How do I confirm the P-C37 is the right belt?
- Check the marking on the back of your old belt. If it shows a C profile and a 940 mm length, the P-C37 is the correct size to quote. You can also measure the top width and height and compare them with 22 mm and 14 mm.
- What should I send to request a quote?
- Send the part number P-C37, the quantity you need and the equipment or drive it is used on. If you have the old belt, include its marking and a photo of the drive so the team can confirm the profile and length.