V-belt Movendis P-C350
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C350 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C350 and any equivalents.
The Movendis P-C350 is a classical wrapped V-belt in the C profile with a length of 8890 mm. It measures 22 mm across the top and 14 mm in height, with a 40-degree angle. Use these dimensions to match it to the belt you are replacing.
The most reliable way to match a classical V-belt is to read the marking on the back of the old belt and compare it with the profile and length of the P-C350. The C profile is the section to confirm first; a belt from a different profile will not seat correctly in the pulley groove. Then check the length against 8890 mm and the cross-section against 22 mm top width and 14 mm height.
If the marking is worn or unreadable, measure the old belt directly. Compare the top width, height and outside length with the P-C350 dimensions, and confirm the 40-degree angle matches the pulley groove. When the drive uses more than one belt, replace the full set at the same time so the load stays evenly distributed across the grooves.
Dimensions
- Section
- C
- Length
- 8890mm
Frequently asked questions
- How do I confirm the P-C350 fits my drive?
- Check the old belt's marking for the C profile and the 8890 mm length, then compare the top width of 22 mm and height of 14 mm. If the old belt is unmarked, measure it and match those dimensions.
- What should I send to request a quote?
- Send the part number P-C350, or the profile and length from the old belt, through WhatsApp or email. Our team will confirm the belt or suggest an equivalent.
- Should I replace all belts on a multi-belt drive at once?
- Yes. Replacing the full set keeps tension and load sharing even across the grooves and avoids mixing a new belt with worn ones.