V-belt Movendis P-C32
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C32 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C32 and any equivalents.
The Movendis P-C32 is a classical wrapped V-belt in the C profile, with an 813 mm length, 22 mm top width, 14 mm height and a 40° angle. The profile and the length are the two dimensions that decide fit, so confirm both against the belt you are replacing before you request a quote.
The C profile sets the cross-section: 22 mm across the top and 14 mm high, with a 40° angle. That section has to sit correctly in the pulley groove. If a belt with the same length but a different profile is fitted, it will not seat properly. The 813 mm length is the second check; measure the old belt or read the marking on its back and match it to this figure.
Classical wrapped construction suits standard industrial drives where the belt runs over pulleys at conventional speeds. When you send your request, include the part number P-C32 and confirm the C profile and 813 mm length. If the belt on the drive carries a different marking, send that marking as well so the profile and length can be checked against this belt.
Dimensions
- Section
- C
- Length
- 813mm
Frequently asked questions
- What do the C profile and 813 mm length mean for fit?
- The C profile is the cross-section of the belt: 22 mm top width, 14 mm height and a 40° angle. The 813 mm length is the belt length. Both must match the drive, because a belt of the same length in another profile will not seat correctly in the pulley groove.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt and compare it with P-C32, then check the profile and length. If the marking is unclear, measure the top width, height and length of the old belt and send those figures with your request.
- What should I send to request a quote?
- Send the part number P-C32, the quantity you need, and the profile and length you are working to. If you are replacing a belt from another brand, include the marking on that belt so the profile and length can be checked against this one.