V-belt Movendis P-C267.75
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C267.75 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C267.75 and any equivalents.
The Movendis P-C267.75 is a classical wrapped V-belt in the C profile. Its 6800 mm length and 22 mm top width make it a long-section belt for drives that need a single continuous span. Use the profile and length together to confirm this belt fits your application.
The C profile is a classical V-belt cross-section. With a 22 mm top width, a 14 mm height and a 40-degree angle, it seats in a standard C-section pulley groove. The 6800 mm length is the datum you match against the old belt or the drive drawing. On long-center drives, this single belt replaces the worn belt without changing pulley alignment or guard clearance.
When you request a quote, send the part number P-C267.75 along with the belt marking and the drive details. If the old belt is unreadable, measure the outside length and the top width, and note the pulley groove profile. The team can confirm the C profile and 6800 mm length against your measurements before you order.
Inspect the drive before installation. Check sheave grooves for wear, verify pulley alignment, and set the correct tension after the belt runs in. On multi-belt drives, replace all belts at the same time so the load stays evenly distributed. Keep the belt clean and free of oil or debris.
Dimensions
- Section
- C
- Length
- 6800mm
Frequently asked questions
- What does the P-C267.75 part number tell me?
- The P-C267.75 is a Movendis classical wrapped V-belt in the C profile with a 6800 mm length. The C profile has a 22 mm top width, a 14 mm height and a 40-degree angle.
- How do I confirm this belt fits my drive?
- Match the profile and length. Check that your pulley groove takes a C-section belt and that the belt path measures 6800 mm. If you are unsure, send the old belt marking and your measurements for a quote.
- What should I send with my quote request?
- Send the part number P-C267.75, the belt marking if readable, and the drive details such as pulley profile and center distance. The team will confirm the C profile and 6800 mm length.