V-belt Movendis P-C230
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C230 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C230 and any equivalents.
The Movendis P-C230 is a classical V-belt in the C profile, with a length of 5842 mm, a top width of 22 mm, a height of 14 mm and a 40° angle. When you are replacing a belt, the marking on the old belt is the starting point: match the profile and the length first, then confirm the part number.
To match the P-C230 to the belt being replaced, read the marking on the back of the old belt. The profile must be C, the length must be 5842 mm, and the cross-section dimensions to check are 22 mm top width and 14 mm height at a 40° angle. If the old marking is worn or unreadable, measure the outside length and the top width, then send those figures with the part number.
This belt is a classical wrapped V-belt from the Movendis Classical Wrapped V-Belts series. It is not a narrow V-belt, cogged belt, timing belt, Poly-V belt, double-V belt, banded belt, variable speed belt or CVT belt. For drives running multiple belts, inspect the sheaves and replace the full set so the load stays even across all grooves.
Send the part number P-C230 by WhatsApp or email to request a quote. Include the old belt marking if you have it, or the measured profile and length if you do not. The team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 5842mm
Frequently asked questions
- How do I confirm the Movendis P-C230 is the right replacement?
- Compare the marking on your old belt with the P-C230 data: C profile, 5842 mm length, 22 mm top width, 14 mm height and 40° angle. If the marking is unreadable, measure the old belt and send those figures with the part number.
- What should I send to request a quote for this belt?
- Send the part number P-C230 by WhatsApp or email. If you are matching an existing belt, include the old belt marking or your measured profile and length so the team can confirm it.
- Should I replace all belts on a multi-belt drive at once?
- Yes. On a drive with several belts, replace the full set and inspect the sheaves at the same time, so the load is shared evenly and the new belts wear together.