V-belt Movendis P-C189
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C189 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C189 and any equivalents.
The Movendis P-C189 is a classical wrapped V-belt in profile C. It measures 4800 mm long, with a 22 mm top width, 14 mm height and a 40° angle. If you are replacing a belt, the first step is to match these dimensions to the belt on the drive.
Start by reading the marking on the back of the old belt. The profile letter and the length are the two values that must line up. This belt is profile C and 4800 mm long. Its top width is 22 mm, its height is 14 mm and its angle is 40°, so those are the dimensions to compare against the belt you are removing.
When you send a quote request, include the part number P-C189 and, if you have it, the marking from the old belt. Our team replies by WhatsApp or email and can help confirm the right belt or suggest an equivalent. If the old belt is worn or the marking is unreadable, measure the top width, height and length and send those numbers.
Inspect the drive before ordering. Check the sheaves for wear, alignment and debris, and confirm the belt sits correctly in the groove. Replacing belts in sets on a multi-belt drive helps keep load sharing even. If you are unsure whether profile C at 4800 mm is the correct fit, send the drive details and we will help you verify.
Dimensions
- Section
- C
- Length
- 4800mm
Frequently asked questions
- How do I confirm the P-C189 matches my old belt?
- Compare the profile letter and length from the old belt's back marking. This belt is profile C and 4800 mm long, with a 22 mm top width, 14 mm height and 40° angle. If the marking is gone, measure these dimensions on the old belt.
- What should I send for a quote?
- Send the part number P-C189 and, if possible, the marking from the old belt or your measured top width, height and length. Our team replies by WhatsApp or email and can help confirm the right belt or suggest an equivalent.
- Should I replace all belts on the drive at once?
- On a multi-belt drive, replacing belts in sets helps maintain even load sharing. Inspect the sheaves for wear and alignment at the same time, and confirm the new belt sits correctly in the groove.