V-belt Movendis P-C182
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C182 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C182 and any equivalents.
The Movendis P-C182 is a classical wrapped V-belt in the C profile, with a length of 4623 mm. This belt is used in industrial drives where a standard classical cross-section is required. Confirm it is the correct replacement by matching the profile and length to your existing belt.
Classical wrapped V-belts like the P-C182 are common on fans, pumps, compressors and other general industrial drives. The C profile has a top width of 22 mm, a height of 14 mm and a 40-degree angle. The outside length is 4623 mm. These dimensions let you compare the belt to the one currently on the drive.
To confirm fit, check the marking on the back of the old belt and measure its top width, height and length. The P-C182 should match those dimensions. If the old belt is worn or the marking is unreadable, measure the drive sheave groove and the center distance to verify the C profile and 4623 mm length.
Send the part number P-C182, along with the old belt marking or your measurements, to request a quote. If you need help identifying the correct belt for your drive, include a photo of the old belt and the sheave details.
Dimensions
- Section
- C
- Length
- 4623mm
Frequently asked questions
- How do I confirm the P-C182 fits my drive?
- Match the profile and length: C profile, 4623 mm. Also check the top width (22 mm), height (14 mm) and angle (40 degrees) against your old belt or sheave groove.
- What should I send to request a quote for this belt?
- Send the part number P-C182 and any marking from the old belt. If the marking is missing, provide the measured top width, height and length.
- Can you help if I am not sure the P-C182 is the right belt?
- Yes. Share a photo of the old belt and the drive details, and we will help confirm the profile and length.