V-belt Movendis P-C166
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C166 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C166 and any equivalents.
The Movendis P-C166 is a classical wrapped V-belt in the C profile. It measures 4216 mm in length, with a 22 mm top width, 14 mm height and a 40 degree angle. Use these figures to confirm the belt fits your drive before you order.
The profile and length are the two dimensions that decide whether a classical V-belt will run correctly. The C profile sets the cross-section: 22 mm across the top, 14 mm high, with a 40 degree angle that matches the pulley groove. The 4216 mm length is the datum you compare against the old belt or the drive specification.
If you are matching a belt already on the machine, read the marking on the back and check it against the P-C166 code. Measure the old belt only if the marking is worn away, and treat the profile first, then the length. A belt that is too narrow or too wide will not sit correctly in the groove, and the wrong length will not tension properly.
Send the part number P-C166 through WhatsApp or email and our team will confirm it or suggest an equivalent. Including the machine or drive reference and a photo of the old belt marking helps us reply with the right belt the first time.
Dimensions
- Section
- C
- Length
- 4216mm
Frequently asked questions
- What do the profile and length of the P-C166 tell me?
- The C profile gives a 22 mm top width, 14 mm height and 40 degree angle for the pulley groove. The length is 4216 mm. Match both to your drive specification or the marking on the belt you are replacing.
- How do I confirm the P-C166 is the right belt for my drive?
- Check the marking on the back of the old belt against P-C166. If it is unreadable, measure the outside length and compare it with 4216 mm, and confirm the belt sits in a C profile groove.
- What should I send to get a quote for the P-C166?
- Send the part number P-C166 by WhatsApp or email, along with the machine or drive reference if you have it. A photo of the old belt marking also helps us confirm the correct belt.