V-belt Movendis P-C161.5
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C161.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C161.5 and any equivalents.
The Movendis P-C161.5 is a classical wrapped V-belt built to the C profile. Start by reading the marking on the back of your old belt: the part number, profile letter and length are your best guide to a correct match. We carry this belt and quote it by part number.
Confirm the marking before you order. A worn belt can lose its legibility, so clean the back of the belt and read the code. P-C161.5 identifies this Movendis belt; the C profile is a classical V-belt cross-section with a 22 mm top width, 14 mm height and 40° angle. The length is 4100 mm.
If the marking is gone, measure the outside length and the top width with the belt laid flat and unstretched. Compare those figures with the profile and length above. Send the part number, or your measurements and a photo of the belt and the drive, by WhatsApp or email. Our team replies promptly and can help confirm the right belt or suggest an equivalent.
Classical wrapped V-belts like this one are used on industrial drives where the sheave groove and belt profile must match. Check the sheaves for wear, oil or debris before fitting a replacement, and make sure the belt sits correctly in the groove. For drives with multiple belts, replace the full set at the same time so the load stays evenly shared.
Dimensions
- Section
- C
- Length
- 4100mm
Frequently asked questions
- How do I identify the belt I need?
- Read the marking on the back of the old belt. The part number, profile and length are usually printed there. If it is unreadable, measure the outside length and top width and send those with a photo of the drive.
- What are the dimensions of the Movendis P-C161.5?
- It is a classical V-belt in the C profile with a 4100 mm length, 22 mm top width, 14 mm height and 40° angle.
- How do I request a quote?
- Send the part number P-C161.5 by WhatsApp or email. If you are unsure of the number, include your measurements and a photo of the belt and sheaves, and our team will help confirm the right belt.