V-belt Movendis P-C155
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C155 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C155 and any equivalents.
The Movendis P-C155 is a classical wrapped V-belt with a C profile and a 3940 mm length. Before fitting it, inspect the drive and sheaves so the new belt runs true and wears evenly.
Check sheave grooves for wear, rust, burrs or embedded debris. A worn groove lets the belt sit too deep and slip, while a damaged groove can cut the wrapped cover. Confirm the sheaves are aligned and the shafts turn freely. Measure the old belt and compare it with the P-C155: the C profile is 22 mm at the top, 14 mm high and has a 40-degree angle.
If the drive uses more than one belt, replace the full set at the same time. A new belt mixed with used belts can ride at a different tension and take more than its share of the load. Clean the grooves, fit the belts without forcing them over the sheave edges, and tension them according to the drive manufacturer's instructions. Recheck tension after the first run-in period.
Dimensions
- Section
- C
- Length
- 3940mm
Frequently asked questions
- What are the dimensions of the Movendis P-C155?
- It is a classical wrapped V-belt with a C profile, a 3940 mm length, a 22 mm top width, a 14 mm height and a 40-degree angle.
- How do I request a quote for the P-C155?
- Send the part number P-C155 by WhatsApp or email. The team replies promptly and can confirm the belt or suggest an equivalent.
- What should I check on the drive before fitting this belt?
- Inspect the sheave grooves for wear, rust, burrs or debris, confirm alignment and free rotation, and replace the full set if the drive uses multiple belts.