V-belt Movendis P-C144
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C144 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C144 and any equivalents.
The Movendis P-C144 is a classical wrapped V-belt in the C profile, with a length of 3658 mm. This page gives the exact dimensions you need to match it to the belt being replaced.
To match this belt, read the marking on the old belt and compare it with the profile and length of the P-C144. The profile is C, the length is 3658 mm, the top width is 22 mm, the height is 14 mm, and the angle is 40 degrees. If those values match the belt on the drive, the P-C144 is the correct replacement.
When the old belt is worn or the marking is unreadable, measure the top width, height and outside length, and confirm the 40-degree angle. A belt that is too wide or too narrow will not sit correctly in the pulley groove, and a length that is off will change the tension and alignment. Use the dimensions above as your reference.
Send the part number P-C144, the belt marking or your measurements by WhatsApp or email to request a quote. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- C
- Length
- 3658mm
Frequently asked questions
- How do I confirm the P-C144 matches my old belt?
- Check the marking on the old belt for the C profile and the 3658 mm length. Then compare the top width of 22 mm, the height of 14 mm and the 40-degree angle. If they match, the P-C144 is the correct replacement.
- What measurements do I need if the old belt marking is gone?
- Measure the top width, the height and the outside length of the old belt, and confirm the angle. The P-C144 is a C profile belt, 3658 mm long, 22 mm wide, 14 mm high, with a 40-degree angle.
- How do I request a quote for the P-C144?
- Send the part number P-C144, the marking from the old belt or your measurements by WhatsApp or email. The team will confirm the belt or suggest an equivalent.