V-belt Movendis P-C142
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C142 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C142 and any equivalents.
The Movendis P-C142 is a classical wrapped V-belt with a C profile and a length of 3607 mm. The C profile and this length are the two numbers to match when you are replacing a belt on a drive. We carry this belt and quote it by part number.
The profile sets the cross-section: this belt has a top width of 22 mm, a height of 14 mm and a 40-degree angle. The length is 3607 mm. On a classical wrapped V-belt, the profile and length together determine whether the belt will sit correctly in the pulley grooves and run at the right tension. A belt with the same profile but a different length, or the same length but a different profile, will not do the same job.
When you request a quote, send the part number P-C142 and the machine or drive it goes on. If you are working from the old belt, read the marking on the back and note the profile and length. If the marking is worn, measure the belt and confirm the profile against the pulley groove. We can help confirm the right belt or suggest an equivalent.
Classical wrapped V-belts are used on industrial drives where the pulley grooves are cut for a classical profile. Check the pulleys for wear and the sheaves for alignment when you replace the belt. If the drive uses more than one belt, replace the set together so the load stays shared.
Dimensions
- Section
- C
- Length
- 3607mm
Frequently asked questions
- What do the profile and length mean on the P-C142?
- The profile is C, which sets the cross-section: 22 mm top width, 14 mm height and a 40-degree angle. The length is 3607 mm. Both values need to match the drive.
- How do I confirm the P-C142 is the right belt?
- Read the marking on the back of the old belt and compare the profile and length. If the marking is not clear, measure the belt and check the pulley groove profile.
- What should I send to request a quote?
- Send the part number P-C142 and the machine or drive it is for. If you have the old belt, include the profile and length from the marking.