V-belt Movendis P-C104.25
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- C
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-C104.25 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-C104.25 and any equivalents.
The Movendis P-C104.25 is a classical wrapped V-belt in the C profile, with a 2650 mm length, 22 mm top width, 14 mm height and 40-degree angle. It is the belt to specify when you are replacing a worn C-section belt on an existing drive. Confirm the profile and length against the belt you are removing before you request a quote.
Matching a classical V-belt starts with the marking on the belt you are replacing. Look for the C profile and the 2650 mm length on the back of the old belt, then compare them with the P-C104.25. The 22 mm top width, 14 mm height and 40-degree angle are the dimensions that keep the belt seated correctly in the pulley groove.
If the marking is worn off, measure the outside length and check the cross-section instead. A C-profile belt is wider and taller than a B or A section, so a quick check of the top width and height will tell you whether the drive takes a C-section belt. Once the profile and length are confirmed, send the part number P-C104.25 for a quote.
Dimensions
- Section
- C
- Length
- 2650mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the marking on the belt you are removing. If it shows a C profile and a 2650 mm length, the P-C104.25 matches those dimensions. You can also measure the top width and height to confirm the C cross-section.
- What should I send with my quote request?
- Send the part number P-C104.25, or the profile and length from the old belt. If the marking is unreadable, include the top width, height and outside length you measured so we can confirm the match.
- Can this belt be used on a drive that takes a different profile?
- No. The P-C104.25 is a C-profile classical V-belt with a 2650 mm length. It should only be used where the pulley grooves and the required length match that profile.