V-belt Movendis P-BB85
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BB
- Series
- Double Sided V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-BB85 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-BB85 and any equivalents.
The Movendis P-BB85 is a double-V (hexagonal) belt in the BB profile with a length of 2159 mm. It is built for drives that require power transmission from both sides of the belt. Before fitting a new belt, inspect the drive and sheaves to protect the belt and keep the drive running correctly.
Check sheave grooves for wear, rust, or embedded debris. Worn grooves can cause a new belt to sit too deep and slip, while damaged groove walls can cut the belt edges. Confirm that sheaves are aligned and that the grooves match the BB profile. Any misalignment or groove damage should be corrected before the P-BB85 is installed.
Inspect the entire drive: bearings, shafts, and tensioning devices. A worn bearing or bent shaft will shorten belt life and can cause the belt to track incorrectly. Verify that the tensioner moves freely and that all fasteners are secure. If the drive uses multiple belts, replace them as a set to maintain even load sharing.
The Movendis P-BB85 measures 2159 mm and is a double-V (hexagonal) belt in the BB profile. When you request a quote, send the part number P-BB85 and confirm the profile and length from the old belt. Our team can help you confirm the correct belt for your drive.
Dimensions
- Section
- BB
- Length
- 2159mm
Frequently asked questions
- What should I check on the drive before installing a Movendis P-BB85?
- Inspect sheave grooves for wear, rust, or debris, and verify that grooves match the BB profile. Check alignment, bearings, shafts, and the tensioning device. Correct any issues before fitting the new belt.
- How do I request a quote for the Movendis P-BB85?
- Send the part number P-BB85 by WhatsApp or email. Include the profile and length from your old belt if you have them, and our team will reply promptly.
- Can I replace just one belt on a multi-belt drive?
- On drives that use multiple belts, replace all belts as a set. Mixing new and used belts can cause uneven tension and load sharing, which may lead to premature failure.