V-belt Movendis P-BB55
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BB
- Series
- Double Sided V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-BB55 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-BB55 and any equivalents.
The Movendis P-BB55 is a double-V (hexagonal) belt in the BB profile with a 1397 mm length. It drives from both faces, so it suits drives that need power taken off either side of the belt. Match it to the belt being replaced before you order.
Start with the belt you are removing. Read the marking on the back for the profile and the part number, then check the profile and length against this page. A double-V belt must match the sheave grooves on both sides, so confirm the BB profile and the 1397 mm length rather than going by appearance alone. If the old belt is worn or the marking is gone, measure the outside length and note the cross section.
Send the part number P-BB55, or the profile and length you measured, by WhatsApp or email and the team will confirm it or suggest an equivalent. Photos of the belt and the drive help when the marking is unclear. For drives running more than one belt, order the full set so the belts are matched.
Check the sheaves while the belt is off. Look for worn grooves, debris and misalignment, and set tension to the drive manufacturer's specification. Keep the old belt with its marking until the replacement is running correctly.
Dimensions
- Section
- BB
- Length
- 1397mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Compare the profile and length on the old belt's back marking with the BB profile and 1397 mm length listed here. If the marking is unreadable, measure the belt and send the dimensions for confirmation.
- Can I replace just one belt on a multi-belt drive?
- On a drive running several belts, replace the full set so the belts are matched and share the load evenly.
- What should I send for a quote?
- Send the part number P-BB55, or the profile and length from the old belt, by WhatsApp or email. Photos of the belt and the drive help confirm the right belt.