V-belt Movendis P-BB240
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BB
- Series
- Double Sided V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-BB240 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-BB240 and any equivalents.
The Movendis P-BB240 is a double-V (hexagonal) belt in the BB profile, with a length of 6096 mm. It is built to run on both sides, so it suits drives where power is taken from either face of the belt. If you are replacing one, match the old belt's marking before you order.
Start by reading the back of the belt you are removing. Confirm the profile is BB and the length is 6096 mm, then compare those two values against the P-BB240. The part number on the belt is the fastest way to verify you have the same item, so note it down before the old belt is discarded.
A double-V belt can be flipped or fitted the wrong way around if the drive is not checked first. Look at how the belt sits in the sheave: both faces should contact the groove, and the belt should not ride on the bottom. If the old belt shows uneven side wear, inspect the sheaves for wear or misalignment before installing the replacement.
Send the part number, the profile and the length in millimeters when you request a quote. If the marking on the old belt is worn or unreadable, share a photo of the belt and the drive so the team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- BB
- Length
- 6096mm
Frequently asked questions
- How do I confirm the P-BB240 is the right replacement?
- Check the marking on the belt you are replacing. The P-BB240 is a double-V (hexagonal) belt in the BB profile with a length of 6096 mm. If those match your old belt, it is the same item.
- What should I send to request a quote?
- Send the part number P-BB240, or the profile BB and the length 6096 mm. If the old belt's marking is unreadable, a photo of the belt and the drive helps the team confirm the right belt.
- Can I replace just one belt on a multi-belt drive?
- On drives that use more than one belt, replacing the full set at the same time keeps the load shared evenly. Check the condition of the other belts and the sheaves before you order.