V-belt Movendis P-BB116
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- BB
- Series
- Double Sided V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-BB116 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-BB116 and any equivalents.
This Movendis P-BB116 is a double-V (hexagonal) belt in the BB profile with a length of 2946 mm. Double-V belts are used where power must be transmitted from both sides of the belt, typically on drives with reversing or multiple driven pulleys. To confirm it fits your application, compare the profile and length against the belt you are replacing.
Double-V belts are common on equipment where a single belt drives pulleys on both its top and bottom faces, such as certain agricultural, industrial, and lawn and garden drives. The BB profile indicates the cross-section, and the 2946 mm length is the datum length. Check that your drive accepts a BB profile belt and that the measured length matches 2946 mm.
When replacing a double-V belt, read the marking on the back of the old belt and note the profile and length. If the marking is worn or missing, measure the outside circumference and compare it to the 2946 mm length listed here. Also inspect the pulleys for wear, alignment, and debris before installing a new belt.
For a quote, send the part number P-BB116 by WhatsApp or email. If you are unsure whether this is the correct belt, include the profile and length from your old belt, or photos of the marking and the drive. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- BB
- Length
- 2946mm
Frequently asked questions
- What is a double-V (hexagonal) belt used for?
- A double-V belt transmits power from both sides of the belt. It is used on drives where pulleys contact the top and bottom faces, often where reversing or multiple driven pulleys are involved.
- How do I confirm the P-BB116 fits my drive?
- Check that your drive uses a BB profile double-V belt and that the required length is 2946 mm. The most reliable method is to compare these values with the marking on the belt you are replacing.
- What information should I send for a quote?
- Send the part number P-BB116. If you want us to verify the fit, also include the profile and length from your old belt, or a photo of the marking and the drive.