V-belt Movendis P-B97.5
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B97.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B97.5 and any equivalents.
The Movendis P-B97.5 is a classical wrapped V-belt with a B profile and a 2477 mm length. It is built to a 17 mm top width, 11 mm height and 40° angle. When you are replacing a belt, match these dimensions to the belt you are removing.
Start by reading the marking on the back of the old belt. Confirm the profile is B and the length is 2477 mm. If the old belt is worn or the marking is unreadable, measure the top width, height and outside length and compare them to the 17 mm, 11 mm and 2477 mm values above.
A wrapped classical V-belt like the P-B97.5 is used on drives that take a single belt or a set. If the drive runs more than one belt, replace the full set at the same time so the belts share the load evenly. Inspect the sheaves for wear, rust or debris before installing the new belt.
Send the part number P-B97.5, the profile and the length to our team by WhatsApp or email to request a quote. If you have the old belt in hand, include the marking and the dimensions you measured. We can confirm the belt or suggest an equivalent.
Dimensions
- Section
- B
- Length
- 2477mm
Frequently asked questions
- How do I match the Movendis P-B97.5 to the belt I am replacing?
- Check the marking on the back of the old belt for the profile and length. The P-B97.5 is a B profile belt with a 2477 mm length, 17 mm top width, 11 mm height and 40° angle. If the marking is gone, measure these dimensions on the old belt and compare them.
- Can I replace just one belt on a multi-belt drive?
- It is best practice to replace all belts on the drive at the same time. Belts that have run together wear together, and mixing a new belt with used ones can cause uneven load sharing.
- What information should I send with my quote request?
- Send the part number P-B97.5, the profile and the length. If you are not sure of the part number, send the marking from the old belt and the dimensions you measured, and our team will confirm the right belt or suggest an equivalent.