V-belt Movendis P-B95
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B95 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B95 and any equivalents.
The Movendis P-B95 is a classical V-belt in the B profile with a 2413 mm length. The profile and length are the two dimensions that decide fit on a driven machine, so both are stated here for direct comparison with the belt you are replacing.
The B profile gives this belt a 17 mm top width and an 11 mm height, with a 40° angle. Those dimensions suit a B-section pulley groove. The 2413 mm length is the datum to match against the old belt or the drive specification.
This is a wrapped classical V-belt from the Movendis Classical Wrapped V-Belts series. Read the marking on the back of the belt and compare it with the profile, top width, height, angle, and length above before ordering.
For a quote, send the part number P-B95, the quantity, and the machine or drive reference. If the marking is worn, send the profile and the measured length so we can confirm the belt.
Dimensions
- Section
- B
- Length
- 2413mm
Frequently asked questions
- What do the profile and length of the P-B95 tell me?
- The B profile sets the cross-section: 17 mm top width, 11 mm height, and a 40° angle. The 2413 mm length sets the belt's path around the pulleys. Both must match the drive.
- How do I confirm this is the right belt?
- Check the marking on the back of the old belt. It should show the B profile and the length. If it does, compare those figures with the 17 mm top width, 11 mm height, 40° angle, and 2413 mm length listed here.
- What should I send for a quote?
- Send the part number P-B95 and the quantity. If you are replacing a belt with no readable marking, send the profile and the measured length instead.