V-belt Movendis P-B93
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B93 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B93 and any equivalents.
The Movendis P-B93 is a classical wrapped V-belt in the B profile. It measures 2360 mm in length, 17 mm across the top, 11 mm high and has a 40° angle. Use these dimensions to match it to the belt you are replacing.
Matching a classical V-belt starts with the profile and length. The P-B93 is a B profile belt, so the replacement must also be a B profile. Its length is 2360 mm. Confirm the profile and length on the belt you are removing before ordering.
The cross-section dimensions are 17 mm top width and 11 mm height. The angle is 40°. If the old belt is worn or the marking is unreadable, measure these dimensions and compare them to the P-B93. A belt that is too wide, too narrow or the wrong height will not sit correctly in the pulley groove.
The Movendis P-B93 is a classical wrapped V-belt. When you request a quote, send the part number and the profile and length from the old belt. If the marking is gone, send the measured top width, height and outside length. The team can confirm the right belt or suggest an equivalent.
For drives with multiple belts, replace all belts at the same time. Mixing a new belt with worn belts can cause uneven tension and vibration. Check the pulleys for wear and alignment before installing the new belt.
Dimensions
- Section
- B
- Length
- 2360mm
Frequently asked questions
- How do I confirm the Movendis P-B93 is the right belt for my drive?
- Check the old belt for a B profile and a 2360 mm length. Also compare the top width (17 mm) and height (11 mm). If the marking is unreadable, measure the old belt and send those dimensions with your quote request.
- What should I send to get a quote for the P-B93?
- Send the part number P-B93 and the profile and length from the belt you are replacing. If the belt is not marked, send the measured top width, height and outside length.
- Can I replace just one belt in a multi-belt drive?
- For drives that use more than one belt, replace all belts at the same time. Mixing a new belt with worn belts can cause uneven tension and vibration.