V-belt Movendis P-B80.75
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B80.75 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B80.75 and any equivalents.
The Movendis P-B80.75 is a classical wrapped V-belt in the B profile, with a 2050 mm length. The 17 mm top width, 11 mm height and 40° angle define how it sits in the sheave groove. Use these values to match the belt to your drive before you order.
Profile and length are the two dimensions that decide fit on a classical V-belt drive. The B profile sets a 17 mm top width and 11 mm height, so the belt seats correctly in a B-section sheave. The 2050 mm length is the datum you compare against the old belt or the drive layout. If either value differs from what the drive calls for, the belt will not run as intended.
The 40° angle is the included angle of the belt cross-section, matched to the sheave groove. A wrapped classical V-belt like this one is used on standard industrial drives where a B-section belt is specified. Check the sheave groove for wear and confirm the belt sits at the correct depth before fitting a replacement.
The marking on the back of the belt is the fastest way to confirm what you have. Read the profile letter and the length, then compare them with the P-B80.75 data above. If the marking is worn or unreadable, measure the top width, height and outside length and send those values with your quote request.
Dimensions
- Section
- B
- Length
- 2050mm
Frequently asked questions
- What do the B profile and 2050 mm length mean for my drive?
- The B profile means the belt has a 17 mm top width and 11 mm height, so it fits B-section sheaves. The 2050 mm length is the belt length to compare against your drive or the old belt. Both values must match the drive specification.
- How do I confirm the P-B80.75 is the right belt?
- Read the marking on the back of the old belt. It should show the profile letter and length. If the marking is gone, measure the top width, height and outside length, then send those measurements with your part number request.
- What should I send to get a quote for this belt?
- Send the part number P-B80.75, or the profile and length from the old belt. If you have the sheave dimensions or a photo of the marking, include those as well. We will confirm the belt or suggest an equivalent.