V-belt Movendis P-B77.75
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- B
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-B77.75 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-B77.75 and any equivalents.
The Movendis P-B77.75 is a classical wrapped V-belt in a B profile, with a length of 1977 mm. It measures 17 mm across the top, 11 mm in height and carries a 40 degree angle. If you are replacing a worn belt, match these four figures to the belt in your hand before you order.
The most reliable way to identify a replacement is to read the marking on the back of the old belt and compare it with the profile and length here. A B profile belt is 17 mm wide at the top and 11 mm tall, so a belt that measures noticeably narrower or sits lower in the groove is a different profile. The 40 degree angle is the standard V shape that seats in the pulley groove; a worn belt can look thinner than it was when new, so measure with that in mind.
Length is the other half of the match. This belt is 1977 mm, and the part number on the belt you are removing should correspond to that figure. If the old marking is rubbed off or unreadable, measure the outside circumference and confirm it against the 1977 mm value. Send the part number, the profile and the length to our team and we will confirm the belt or suggest an equivalent.
On drives that run more than one belt, replace the full set at the same time so the belts share the load evenly. Check the pulleys for wear, alignment and any buildup in the grooves while the drive is open, since a worn groove will shorten the life of a new belt. If you are unsure which belt you need, send a photo of the marking and the drive layout.
Dimensions
- Section
- B
- Length
- 1977mm
Frequently asked questions
- How do I confirm the P-B77.75 is the right belt for my drive?
- Check the marking on the back of the belt you are replacing and compare the profile and length with this listing. The P-B77.75 is a B profile classical V-belt, 1977 mm long, 17 mm top width, 11 mm height, 40 degree angle. If the marking is gone, measure the belt and send the figures to our team for confirmation.
- What information should I send to get a quote?
- Send the part number P-B77.75, or the marking from the old belt, along with the profile and length if you have them. A photo of the belt and the drive helps us confirm the match. You can reach us by WhatsApp or email and we will reply promptly.
- Should I replace more than one belt at a time?
- On a multi-belt drive, replace the whole set together so the belts carry the load evenly. Mixing a new belt with worn ones can cause the new belt to take more than its share. Inspect the pulleys for wear and alignment at the same time.